1. Home
  2. Toyota Forklifts
  3. Electric Motor

COUNTER-BALANCED STACKER

STACKER

  • 2,000 - 4,000 lbs. Lifting Capacity
  • Heavy-Duty Transmission
  • AUL-E Approved
  • Length to forkface 64.8 - 76.6 in
  • Mast Lowered Height 83 in
  • Overall Width 34.1 in

Toyota's Counter-Balanced Stacker is a thin, highly versatile lift that compliments nearly any primarily indoor application. Balanced similar to a traditional forklift and without baselegs, the Counter-Balanced Stacker can fit into tight spaces. Extremely durable and budget friendly, the Toyota Counter-Balanced Stacker can help increase both your uptime and your bottom line.


17

LIFT TRUCKS

OPERABILITY AND ERGONOMICS

  • Emergency power disconnect switch
  • Automatic resetting circuit breaker
  • Reverse polarity protection
  • Mechanical drum brake
  • Directional thumb control
  • Direction reverse switch on control handle
  • Control handle with 8.5 degree ergonomic angle
  • Power on self test with self-diagnostics

PERFORMANCE

  • 2000 lbs capacity (6BWC10)
  • 3000 lbs capacity (6BWC15)
  • 4000 lbs capacity (6BWC20)
  • 24 Volt electrical system
  • MOSFET transistor control system
  • Separately excited drive motor (SEM)
  • UL-approved model type E
  • On/off key stitch
  • Programmable performance
  • Electronic raise and lower controls in operator handle
  • Manual raise and lower controls
  • Class 'H'; motor insulation
  • Oil-immersed power-train

BODY/EXTERIOR DESIGN

  • Electronic horn
  • 32.3"x13.3" battery compartment
  • 30" wide ITA Class II fork carriage
  • 42" fork length
  • 48" load backrest extension
  • Mast tile,3 degree forward 8 degree backward
  • Internal hose reeving
  • Rubber drive tire, 10.5" x5"
  • Polyurethane load wheels, 10"x4"
  • Polyurethane caster wheels, 4"x2.5"
  • Fully-hinged steel service access door
  • Wide view 2-stage mast (V)
  • Spring-loaded torsion bar suspension with automatic load-sensing adjustment and stabilizing casters
  • Drive axle mounted string guards
  • Pressure overload valve and lowering control fuses

OPTIONS

  • Twin Light & Fan Package w/ Independent Controls Located on the OHG, this unit provides an enclosed fan with adjustable louvers and a reading light.
  • Battery Discharge Indicator W/ Hour Meter In Combination Gauge W/ Lift Interrupt The hour meter is replaced with a combination battery discharge indicator and hour meter with lift interrupt.
  • Pallet Centering Guide Allows self centering of the pallet on the forks.

SPECIFICATION CHART

Model Number Load Capacity* (lbs.) Max. Travel Speed Full Load (MPH) Max. Lift Speed Full Load (FPM) Max. Gradeability Full Load (%) Basic Right Angle Stack** (IN.)
6BWC10 2,000 2.9 37 10 111
6BWC15 3,000 3 32 10 116
6BWC20 4,000 2.8 27 10 122

* Based on 24" load center.
** Add load length and clearance.