WALKIE REACH TRUCK
REACH TRUCK
- 3,000 lbs. Lifting Capacity
- Programmable Drive System
- UL-E Approved
- Length to forkface 47.4 - 50.6 in
- Mast Lowered Height 83 in
- Overall Width 40 - 58 in
The extremely versatile Toyota Walkie Reach Truck assists in decreasing operator fatigue and downtime by making maneuvering products through the warehouse quick and efficient. Easy to use and more economical than a sit-down forklift, the Toyota Walkie Reach Truck increases uptime and boosts productivity.
LIFT TRUCKS
PERFORMANCE
- 3000 lbs capacity
- 24 Volt electrical system
- MOSFET transistor control system
- Separately excited drive motor (SEM)
- UL-approved model type E
- On/off key switch
- Programmable performance
- Electronic raise and lower controls in operator handle
- Manual raise and lower controls
- Manual reach/retract and tilt controls
- Class 'H' motor insulation
- Oil-immersed power-train
BODY/EXTERIOR DESIGN
- 32" to 50" baseleg openings (inside dimensions) in 1" increments
- Electronic horn
- 32.3"x13.3" battery compartment
- Rugged reach pantograph
- 30" wide ITA Class II fork carriage
- 42" fork length
- 48" tilting load backrest extension (3 º forward / 4 º backward)
- Internal hose reeving
- Crowned poly drive tire, 10.5"x5"
- Tandem Polyurethane load wheels, 4"x2.875"
- Polyurethane caster wheels, 4"x2.5"
- Fully-hinged steel service access door
- Spring-loaded torsion bar suspension with automatic load-sensing adjustment and stabilizing
- Wide view 2-stage mast (V)
- Drive axle mounted string guards
- Pressure overload valve & lowering control fuses
OPERABILITY & ERGONOMICS
- Emergency power disconnect switch
- Automatic resetting circuit breaker
- Reverse polarity protection
- Mechanical drum brake
- Directional thumb control
- Safety glass mast guard
- Direction reverse switch on control handle
- Control handle with 8.5º ergonomic angle
- Power on self test with self-diagnostics
OPTIONS
- Pallet Centering Guide Allows self centering of the pallet on the forks.
- Twist Grip Control Handle Good for applications where heavy gloves are required to be worn by the operator.
- Battery Discharge Indicator W/ Hour Meter In Combination Gauge W/ Lift Interrupt The hour meter is replaced with a combination battery discharge indicator and hour meter with lift interrupt.
SPECIFICATION CHART
| Model Number | Load Capacity* (lbs.) | Max. Travel Speed Full Load (MPH) | Max. Lift Speed Full Load (FPM) | Max. Gradeability Full Load (%) | Basic Right Angle Stack** (IN.) |
|---|---|---|---|---|---|
| 6BWR15 | 3,000 | 2.8 | 29 - 60 | 10 | 91 |
* Based on 24" load center.
** Add load length and clearance.